Economic constant temperature humidity simulate climatic condition thermal shock test chamber

Thermal shock test chamber Briefly introduction:
High and low temperature (two cases) thermal shock test chamber system structure can be divided into two parts. Namely, high temperature tank (preheating zone), cryogenic tank (pre-cooling zone).

Thermal shock test chamber Testing principle
Testing principle mainly through controlling the portable basket (test samples District) to quickly move between cryogenic tank and high temperature tank to achieve rapid thermal shock test. The whole testing process test samples along with mobile gondola to move together. The test chaber is suitable for the examination of the whole set of products, components, parts and materials subjected to rapid changes in temperature. The temperature impact test chamber are used in a shortest time to evaluate the test samples due to thermal expansion and contraction caused by the changes of chemical or physical damage.

The advantages of SANWOOD thermal shock test chamber
1.Temperature and humidity setting protection
2.Two zone thermal shock test chamber. Air pressure driven test area(sample)
3.Error failure medical record table cartilage device
4.HFC environmentally friendly refrigerant, SWEP plate heat exchanger, two type refrigeration system
5.Optimal structure and high efficiency refrigeration machinery design
6.Air intakes and returns with sensor control
7.Sever Valve, Kinetic energy automatic load control
8.Testing range: 150(60)℃~ (-10)-65℃
9.50% power saving efficiency and automatic servo control
10.Compatible with BUS CM remote monitoring management system
11.Can expanded: LN2V liquid nitrogen rapid cooling control device
12.Thermal shock test chamber movement time is 10 seconds.Can meet MIL, IEC and JIS standard.
13.Wind valve switching time is 10 seconds
14. Thermal shock test chamber temperature recovery time is 5 minutes, can meet the test specification
15.The end of the experiment, the product automatically return to the normal temperature to avoid frost dew
16.The world's first built-in USB2.0 interface digital recorder (recording can be plugged in at any time)
17.Industrial grade upright full-color touch multilingual programmable control system
18.The world's first standard shipping included USB2.0 and disk storage machine dual interface
19.The protective mechanism of return to normal temperature after the test is finished.
20.The world's first complete test curve analysis shows that there is no time limit.

Thermal shock test chamber Specification:

SANWOOD PRODUCTION

SANWOOD Environmental Chambers was established in 1995, which integrated Taiwan and Japan technologies. We have been focus on the most secure and reliable climatic test chamber technology since established.

OUR EXHIBITION

Our products upgrade constantly and our customers come portable batteries, power batteries, battery, lithium batteries, lead-acid, new energy vehicles, electric bicycles, electric tools, electric systems, solar, military, universities research and other technology industries fields.

CUSTOMER WITNESS

Products are exported to more than 60 countries, such as Russia, Singapore, the United States, Turkey, Denmark, Vietnam, India, Malaysia, Kazakhstan, Austria, Canada, etc.

SANWOOD CULTURE

Sanwood thrived little by little and aims to become the leading brand in the safety and reliability environmental test equipment industry all over the worldber.

Guangdong Sanwood Technology Co., Ltd, founded at 1995, with 25 years manufacturing experience, we are now engaging 100+ workers and 20+ engineers (structure, refrigerant, assembly, quality control, pre-tests), 2 production lines with facility 6,000+ square meters, monthly capability reaches to 120 units which makes annual production capability more than 1,000 units. Products cover the full range of battery cells, modules and packs or even the whole automobile to run the environmental reliability tests.

Achieved national high enterprise reward, certified with ISO9001:2015, ISO14001:2015 and CE certificate, our products are exporting to more than 60 countries and regions, cooperated with top manufacturers in the EV lithium-ion battery industry such as ATL, BYD, CATL, Envision AESC, Farasis, Lishen, Sunwoda, Svolt and major playes in the European markets.

Customer service is as important as product quality, we are planning to build our European sales & service center to further iron our instant and efficient after-sales services for our clients.

Sanwood, born to provide high quality products! Leave us a message or give us a call TODAY to propose you a tailored test solutions.